Tire Pressure Warning System for Motorcycles - great Safety Feature for every Biker!
VERSION: For 11,5 mm Tire Valves at Front- and Rear Tire (Tire valve Hole at Rim = Dimension "A" at Tire Valve - see Photo 7). Fits only tubeless Tires!
When you get used to this very important Safety-Feature you will never want to miss it!
Features:
- System with inside Rim positioned Tire Pressure Sender: Cheaper Versions with Senders at Tire Valve Cap
may create additional Risk Factor in Case of Cap is not 100% closed or gets permeable.
- This Display Unit is connected via Plus- and Minus-Wire to Electric Supply of the Motorcycle. Therefore it is automaticly switched on with Ignition Key turned on, no Battery Change of the Display Unit is needed! Further there is no difficult switching Situation if you wear Gloves during Drive. Same applies for switching on/off the Illumination wearing Gloves - Illumination is permanently on during Drive. Also the Voltage of the Bikes Electric System is monitored which can Indicate a Battery or Alternator fault much earlier.
- Shows Tire Pressure, Tire Temperature and Vehicles Voltage (+ Sender Voltage)
- Different Display Modi can be selected but in Case of a Warning it switches automaticly to the critical Value !
- Four selectable Display Modes can be selected with only on Knob:
1. Alternates between Tire Pressure and Tire Temperature for some Seconds
2. Tire Pressure only (adjustable in bar or PSI) (see Photo 1)
3. Tire Temperature only (adjustable in Celsius or Fahrenheit) (see Photo 2)
4. Voltage of Bikes Electric System (see Photo 5)
- Minimum Pressure Limits for Alarm Activation can be adjusted separately for Front & Rear Tire.
Photo 3 shows Alarm Condition on Front Tire (Pressure too low at 1,6 bar), the critical Value starts blinking.
Tire Pressure Senders and Tire Valves are together designed as one Unit (needs Disassembly for Tire from Rim for Installation).
Manufacturers Technical Data & Diemnsions:
Voltage: 9-16V
Operating Frequency: 433,92 MHz +/-50
Pressure Monitoring Range: 0-74 psi / 0-5 bar
Pressure Reading Accuracy: +/- 1 psi / +/- 0,1 bar
Batteries inside Transmitter can not be changed. New Senders must be purchased if Senders Battery gets depleted. Senders Battery lasts 3-4 Years after Installation in Vehicle and first Use.
Dimension "B" (see Photo 8): approx. 9,2 mm (Transmitter Housing not allowed to contact Rim!)
Transmitter Housing (black): Length 50,5 mm x Width 21,5 mm x Height (highest Point) 22,00 mm
Content: 1 x Front Wheel Tramsitter (11,5mm), 1 x Rear Wheel Transmitter (11,5mm), Display Unit, 90° Tire valve Filling Adapter (not necessarily needed), Mounting Material (see Photo 6), Installation and User Manual in English Language.
Fits: Motorcycles with conventional Tire Valves (Size see above)
This item is shipped via insured DHL shipping. If you want to have us shipping to destinations outside Germany we necessarily need a phone number for DHL otherwise they won`t accept the assigment and your shipment can`t go thru the electronic application filling process at DHL. Please insert your phone number during purchase process or afterwards in your client account (if you already have one) or send it to support@raabspeed-imports.com. If we spend every effort - you`ll enjoy our fast delivery service!